Model BB-950D
Pneumatic
air tires
Holds 200 lbs of
blasting abrasive Nozzle sizes included
1/8, 3/16, 7/32, 1/4
Depending on
Nozzle size air reqired is 22 CFM (1/8") 125 CFM (1/4")
Nozzle sizes included 1/8, 3/16, 7/32, 1/4
Depending on Nozzle size air reqired is 22 CFM (1/8") 125
CFM (1/4")
Has safety
pressure release valve, 1/2 inch brass valves for air throttling and sand metering 65 to 125 PSI
1/2 AIR INLET
Heavy Duty 1/2 ID 16 foot of THUNDER BLAST hose
DEADMAN shut off valve makes this completely safe
4 interchangeable nozzles
Blasting hood included
Shipping weight: 170 lbs
Color: Black
Please compare this blaster to any on the market. This has an
ASME pressure vessel which means it is tested to be safe at over 300 PSI. The blasting
hose has quick connection with a safety lock and the blasting hose is built by Thunder Blast. This is a much more expensive
item to replace on this blaster but, at BADBOY Blasters, Inc. we are all about safety. When the ends are placed on the
hose, there are screws that go through the collar and hose to prevent it from coming apart during operation. This
will also prevent injuries and makes it easier especially since the ends are detachable for hose repair and to transport
the blaster. The wheels are pneumatic to handle the weight of this blaster including the weight of the media.
We have invested a lot of time in this design for this blaster and are happy with the fact that it is the top of
the line to be built in this industry.
It has
an inverted top which means no funnel is needed when filling. The design makes it nice. The top is domed inward
therefore, there is no need for a funnel when filling. The unit has a pressure seal insert on the fill side of the portable
blaster. This is a huge safety feature. Most others have the screw off type. Simply fill with abrasive,
hold up the handle on the fill seal, and turn on the air and you are ready to blast. We decided to have this sandblaster
designed and built with a DEADMAN valve.